BeSight PO3XM is an indicator built on the Power of 3 / AMD concept — Accumulation, Manipulation and Distribution. Rather than only asking whether price is going up or down, it tracks the sequence of price behavior: from the accumulation range, to the Liquidity sweep, to the return back inside the range, to confirmation of a Directional Move, before any Trade Plan is built. Once the conditions are met, the system finds the right Key Level and shows Entry, Stop Loss, Take Profit 1, Take Profit 2, Risk and Lot Size on the chart.
Platform MetaTrader 5
File type Indicator
Current version BeSight PO3XM 1.0
Understand the Market Cycle
See the Market as 3 Phases with AMD
Accumulation
The system detects when price is building an accumulation range and records the High / Low of the Range as a Liquidity Reference for the next step.
Manipulation
Once the Accumulation range is complete, the system tracks Liquidity Sweeps above or below the range. A break of the range alone is not a signal — the system waits for price to return inside the Range and checks additional structure, reducing the chance of automatically treating a Breakout as Manipulation.
Distribution
After a Liquidity Sweep and a return into the Range, the system checks for a Market Structure Shift and Displacement to confirm entry into the Distribution Phase. Only when its conditions are met does it start looking for a Trade Setup.
It is not enough to see a Sweep and jump in — wait for the structure to confirm before building a plan
Smart Key Level Detection
Find entries from meaningful key levels
After detecting an AMD Structure, the system automatically searches for the Key Levels related to that cycle, such as
Fair Value Gap (FVG)
Detects Imbalances created during price movement
Order Block (OB)
Finds Demand / Supply Order Blocks from structure and Displacement
Swing High / Swing Low
Uses Swing Structure as another Entry reference
Liquidity Sweep Level
Records the areas where Liquidity was swept, to support analysis of the Setup's structure
So the system does not use the same Entry style in every situation — it chooses from the Key Levels formed inside that cycle's AMD structure.
Key Level Quality
Not every Zone is equally important
PO3XM has a Key Level Strength evaluation system that helps select the price levels used to build a Trade Plan. The system considers several factors, then produces a Quality Score used to select Levels.
- Relative Volume
- Impulse / Candle Body vs ATR
- Distribution confirmation
- Whether the Level has been Tested
- Whether the Level has been Broken or Invalidated
Quality Score is a rule-based (Heuristic) score used to compare Level quality. It is not a percentage probability of winning.
Automatic Trade Plan
When the Setup is ready, the trade plan is built on your chart
When the AMD Structure and Key Level pass the conditions, the system can build a Trade Plan with the key information, including
BUY / SELL Entry
The price level the system picks to wait for entry
Stop Loss
Calculated from Structure with an SL Buffer
Take Profit 1
The first profit target based on a Risk Multiple
Take Profit 2
The next target for Setups that can keep moving
Risk : Reward
Shows targets in R so the Risk/Reward of the Setup is clear
Every level is shown on the chart, so you see the plan before price reaches Entry
Structure-Based Stop Loss
Stop Loss based on structure, not a random distance
PO3XM places the Stop Loss from the structure of the detected Manipulation and Sweep. The system can add a Buffer beyond the Structure by a configurable amount so the SL position fits the Setup's structure. For Re-entry, users can also choose the SL Anchor style between
M Structure
References the original Manipulation structure
D Structure
References the Distribution structure for a tighter Stop
Built-in Money Management
Know your Lot Size before you decide to enter
Just set the Account Capital you want as the calculation base, and Risk per Trade as either a % of capital or a fixed amount. The system automatically calculates Position Size from the distance between Entry and Stop Loss. Supports Presets for
Example concept
It then calculates a Lot Size that matches the SL distance of that Setup, rounding the size down to the Lot Step so the simulated risk never exceeds the configured Risk Budget.
Estimated P/L
See Risk and simulated results on the chart
Beyond Lot Size, the system can also show Estimated P/L for each level of the Trade Plan, so before entering you can already see
SL
How much you lose
TP1
What the result is
TP2
What the result is
This keeps decisions from relying only on the number of “points”, and ties them back to the account's Capital and Risk Figures are simulated from your configured inputs and exclude Spread, Commission, Swap, Slippage and Margin Check
Adaptive Take Profit
When the market changes, the Take Profit plan can adapt to price behavior
One of PO3XM's key systems is Adaptive TP. If the Entry has triggered but price moves away from the Entry Zone and Retests it repeatedly before reaching TP1, the system can reduce the targets to nearer TPs according to your settings.
Original
TP1 = 10R TP2 = 15R
Adaptive — when a Retest meets the conditions
TP1 = 1R TP2 = 5R
Stop Loss stays the same. The idea is that the Trade Plan can respond to price behavior after Entry, instead of using a fixed Target in every situation.
A 50% Re-entry
Miss the first Entry? The system can still look for a new opportunity
After entering Distribution, if price returns to 50% of the Accumulation Range, the system can start the Re-entry Setup search again. PO3XM looks for Key Levels formed in the D Phase before price reached the 50% area, such as
D-FVG
D-Order Block
D-Swing
If a Level passes the conditions, the system can build a new Trade Plan for the Re-entry. Re-entries are limited per Cycle and are not used to replace a Position that has already been entered.
Adaptive Entry Logic
The system selects entries from important Key Levels
When several Key Levels appear at once, PO3XM evaluates the Candidates that can be used as Entry, checking both
- Level type — FVG / Order Block / Swing
- Quality Score
- Position relative to Stop Loss
- Direction of the Retest
- Level status — Active / Tested / Broken / Swept / Expired
before choosing the Level that fits the system's rules to build a Trade Plan
AI Demand / Supply Zones
Add context from Gold Futures
PO3XM has an AI Demand Supply Zone Optimize system, separate from the AMD Engine. It references confirmed Pivots from COMEX — Gold Futures on the H1 Timeframe and splits Demand / Supply into several levels.
Demand
Lower Demand Medium Demand Max Demand
Supply
Lower Supply Medium Supply Max Supply
Zones are regenerated daily to serve as extra context for analyzing key gold price levels.
Monthly Performance Dashboard
No need to count Setups by hand
The Dashboard inside PO3XM summarizes the results of Trade Plans for the current month, such as
Win Rate
Percentage of Setups closed as a Win
W / L
Number of Wins and Losses
Net R
Total in Risk Multiple units
Net Points
Net Points total
Plans
Number of plans the system created
Entered
Number of plans where price reached Entry
Net P/L
Simulated financial result
The Dashboard lets you review the system's behavior from data on the chart, rather than looking only at the latest Setup.
Trade History
Review past Setups right on the chart
When a Trade ends, the system can keep the Closed Trade on the chart, showing the Risk / Reward area and the result, such as
So you can look back at where each Setup happened and how it ended
Discord Real-time Alerts
Automatic alerts
PO3XM supports sending messages to Discord through TradingView Webhook and can notify you of key system events, such as
Accumulation Started
Detected the start of the A Phase
New Setup
A new Trade Plan with Entry / SL / TP1 / TP2
Entry Active
Price reached Entry
TP1 Reached
First target reached
TP2 Completed
Final Target reached
Stop Loss
Setup Cancelled
Targets Updated
Adaptive TP triggered
50% Re-entry
Detected a new Trade Plan after price returned to A 50%
So you can connect the Indicator's Signals to a Community or Private Trading Room without watching the screen all the time
Built for Rule-Based Execution
From Market Structure to a clear trade plan
BeSight PO3XM brings the key steps together in a single Workflow
Detect Accumulation
Finds the Range used as the base of the Cycle
Track Liquidity Sweep
Checks for a Liquidity sweep above or below the Range
Confirm Manipulation
Waits for price to return inside the range
Confirm Distribution
Checks for Market Structure Shift and Displacement
Find Key Levels
Finds FVG / Order Block / Swing
Score & Select Entry
Evaluates and selects the Level that passes the conditions
Build Trade Plan
Builds Entry / SL / TP1 / TP2
Calculate Position Size
Calculates Lot Size from Capital and Risk
Manage the Setup
Tracks TP, SL, Retest, Adaptive TP and Re-entry
Record the Result
Logs results to the Dashboard and Trade History
One System. From Structure to Execution.
Analyze the Structure. Wait for Confirmation. Execute the Plan.
Rule-Based Execution
- No need to mark the AMD range yourself
- No need to hunt for Key Levels one by one
- No need to recalculate Risk and Lot Size for every Setup
- No need to count past statistics by hand
About PO3XM
BeSight PO3XM is designed to turn the Power of 3 concept into a Rule-Based Execution Model that you can follow and verify on the chart.
Ready to turn the Power of 3 concept into your own Execution system?